My project

Lighting project in classroom

Materials

2 sensors

4 clips of electrician

4 screwdrivers

1 hole

10 meters of gutter

1 box of 14 gauge lead wire

1 box of 18 gauge lead wire

1 electrical tape

cloves

Development

1. - Mark the spots where the nails were placed.

2. - Set the channel and drilling.

3. - Put the nails.

4. - Measure from one end to the lead wire to be used.

5. - Put the lead wire into the channel.

6. - Place the sensor in its base.

7. - Clamp the current leads and load.

8. - Put tape.

9. - Make testing of sensing.